#1

How to Connect the Scan Tools in a 1992 Accord

in Welcome to the Forum ! Sun Jan 15, 2017 5:56 am
by piros365 • 45 Posts

Every 1992 Honda Accord is equipped with a diagnostic scan port. An engine code scanning tool can be connected to the port to determine the cause of a problem that the computer detected.BMW ICOM A3 Pro Many scan tools can also clear the codes once they have been read. A check engine light caused by an error code will come back on if the source of the problem has not been corrected.
BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3

Pull back on the carpet under the glove compartment until you see a panel.

Pull on the handle on the panel to remove the panel door.GM Tech 2

Connect the scan tool connector into the port that is now exposed.
BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3 BMW ICOM A3 Pro GM Tech 2 Vagcom 16.8.3

Insert the key into the Accord's ignition switch. Turn the ignition switch to "ON."

Press the power button on the scan tool.Vagcom 16.8.3 The tool can now be used to scan the engine computer codes.

Scroll up